Lot includes 4 sections of crowd fencing 8 feet long and 8 feet high each

Tabs to be glued as needed for added strength

The fences are made of plastic (PLA) and mimic those made of metal.

Ideal for your models and miniature construction scenes.

Characteristics
WARNING: For adult use only. Not a toy. Small pieces can be swallowed and cause suffocation. The pieces are solid but can be crushed or broken by improper handling.
Do not expose to UV PLA can become crisp and fade. Watch out for sunlight through a window with glass that does not filter UV (ultraviolet rays).
Heat reistance
Do not expose to more than 120° Fahrenheit or 50° Celcius Beyond this temperature, the surface may be permanently marked and the block may deform under pressure (fingers or other)
Bonding
Can be glued with CA glue (cyanoacrylate) AC glue leaves more or less trace or whitish film. Apply as little as possible with small drops only to the useful places and ideally not visible. In general, the whitish traces can be removed by rubbing with the sticky part of a masking tape or else by making a surface preparation as for painting.
The visible glue does not dye so dye before gluing.
Suggestion: hold with a repositionnable museum wax (no glue) These waxes are specially designed so that the pieces are easily detachable. We can often replace the wax and reposition the box. These waxes wipe well and can be washed in warm (<50C or 120F) soapy water if the surface finish allows it.
Finish
Do not use aceton Acetone can alter the surface finish but does not smooth it because it does not dissolve the PLA deep enough.
Paint
To maximize adhesion, use a PLA primer Make the desired surface finish (see above). A plastic model primer is generally adequate, but check its technical data sheet for compatibility with PLA (polylactic acid). Several YouTube videos are available for finishing and painting 3D objects.

Write a review

Note: HTML is not translated!
    Bad           Good

Temporary Construction-Site Fences 1/48 ("O" Gauge)

  • 9.50$


  • 2 or more 9.00$
  • 3 or more 8.50$

Related Products

Chain Link Fences - Scale 1/48 ("O" Gauge)

Chain Link Fences - Scale 1/48 ("O" Gauge)

The basic set includes 4 fences 8 inches long, each representing 4 sections of 8 feet. The lot totals 32 inches which represents 128 feet. Other le..

14.00$

Sliding Door - Chain Link Fence - Scale 1/48 ("O" Gauge)

Sliding Door - Chain Link Fence - Scale 1/48 ("O" Gauge)

The set includes a fixed part with pulleys and another sliding as well as a post and closing guides. Door opening on the left in the picture. Othe..

7.00$

Safety fencing on legs or on JERSEY - Scale 1/48 ("O")

Safety fencing on legs or on JERSEY - Scale 1/48 ("O")

The lot includes 4 sections of security fences of 13 feet each. Each lot includes anchors to fix the fences on the JERSEY as well as a set of legs a..

9.50$

Crowd fence - Scale 1/48 ("O")

Crowd fence - Scale 1/48 ("O")

The lot includes 6 sections of scale crowd fences equivalent to 102 inches long and 44 inches height each. Fences can interlock. Feet could be be g..

9.50$

Tags: fence, guardrail, jersey, concrete, 1/48