Small wooden or colorful cabins all look great. It is necessary to assemble the walls, ceiling and floor (see photos). No gluing or finishing is required before placing them directly on your model or stage.
They are printed with a PLA filament 3D printer with different colors or with PLA containing about 30% wood particles. Those containing wood can be painted or stained according to your needs.
The size of the small cabins is approximately 2 1/2 X 1 1/2 X 2 inches.
| Characteristics | |
| WARNING: For adult use only. Not a toy. | Small pieces can be swallowed and cause suffocation. The pieces are solid but can be crushed or broken by improper handling. |
| Do not expose to UV | PLA can become crisp and fade. Watch out for sunlight through a window with glass that does not filter UV (ultraviolet rays). |
| Heat reistance | |
| Do not expose to more than 120° Fahrenheit or 50° Celcius | Beyond this temperature, the surface may be permanently marked and the block may deform under pressure (fingers or other) |
| Bonding | |
| Can be glued with CA glue (cyanoacrylate) | AC glue leaves more or less trace or whitish film. Apply as little as possible with small drops only to the useful places and ideally not visible. In general, the whitish traces can be removed by rubbing with the sticky part of a masking tape or else by making a surface preparation as for painting. The visible glue does not dye so dye before gluing. |
| Suggestion: hold with a repositionnable museum wax (no glue) | These waxes are specially designed so that the pieces are easily detachable. We can often replace the wax and reposition the box. These waxes wipe well and can be washed in warm (<50C or 120F) soapy water if the surface finish allows it. |
| Finish | |
| Do not use aceton | Acetone can alter the surface finish but does not smooth it because it does not dissolve the PLA deep enough. |
Small Cabins -1/48 ("O" scale)
- Brand: MM Art Miniature
- Product Code: CB
- Availability: 2 to 3 weeks
-
9.00$
